PE

Polyethylene

PE

POLYMERS


Our polymer team is comprised of traders with rich knowledge of markets we serve and supply chain operations specialists. We are extremely proud of the long and sustainable business associations we have been able to create as a result of this globally integrated network of experienced professionals.

With local presence across major markets in Asia, Europe, Middle East, Latin America and Africa we are a preferred partner. The excellent relationship we enjoy with recognized brand manufacturers and global banking network based on trust and respect has enabled our polymer business to provide best in class bespoke solutions in terms of product availability, quality & supply reliability, competitive pricing and flexibility in commercial terms.

 

 

Polyethylene (PE)

  • High-density Polyethylene (HDPE)
  • Linear Low-density Polyethylene (LLDPE)
  • Low-density Polyethylene (LDPE)
  • Medium-density Polyethylene (MDPE)
  • Enhanced Polyethylene (EPE)
  • Metallocene-Polyethylene (mPE)
  • Bi-modal – Polyethylene

 

MDPE

GRADE

       

       MFI          

SPEC APPLICATION

 

MD 38504 UV

 

4±1 DOWNLOAD SPEC Rotational molding and some Injection molding 

 

Polyethylene LDPE is defined by adensity range of 0.910–0.940 g/cm3. LDPE has a high degree of short and long chain branching.

HDPE is defined by a density of greater or equal to 0.941 g/cm3.  has low degree of branching and thus stronger intermolecular forces and tensile strength.- LDPE film blow molding
– LDPE pipe extrusion
– HDPE natural injection molding
– HDPE natural blow molding
– HDPE pipe extrusion

LDPE

GRADE MFI SPEC APPLICATION

 

LD2420D

 

      0.27                      DOWNLOAD SHEET Films, Extrusion, Blow molding

 

L2100TN00

 

       0.3           DOWNLOAD SHEET  Shrink hoods, Iindustrial sacks, Heavy duty carrier bags and liners.

 

LD –LH0030

 

 0.3 DOWNLOAD SHEET Extrusion

 

LL0209AA

 

  0.5 DOWNLOAD SHEET General purpose Film applications

 

L2102TN42

 

 1.9 DOWNLOAD SHEET Film

 

LTM 2119X (LF0190)

 

 1.9 DOWNLOAD SHEET Film

 

LD2420H

 

 2 DOWNLOAD SHEET General purpose Films

 

LF0200

 

2 DOWNLOAD SHEET Film, Injection mouldings

 

LD2420K

 

4 DOWNLOAD SHEET Film

 

LDPE 2404TC47

 

4.7 DOWNLOAD SHEET Film


 

 
 

Polyethylene

Polyethylenes are semi-crystalline materials with excellent chemical resistance, good fatigue and wear resistance, and a wide range of properties (due to differences in length of the polymer chain.) Polyethylenes are easy to distinguish from other plastics because they float in water.

Polyethylenes provide good resistance to organic solvents, degreasing agents and electrolytic attack. They have higher impact strength, but lower working temperatures and tensile strengths than polypropylene. They are light in weight, resistant to staining, and have low moisture absorption rates.

 

High Density Polyethylene

Representing the largest portion of the polyethylene applications, HDPE offers excellent impact resistance, light weight, low moisture absorption, and high tensile strength. HDPE is also non-toxic and non-staining and meets FDA and USDA certification for food processing.

Sheet, Rod, Flexible Tube, Welding Rod, Cutting Board, Perforated Sheet

GRADE Melt Flow Rate at 190°C,2.16 kg. Melt Mass-Flow Rate (MFR)(190°C/5kg) Melt Mass-Flow Rate (MFR) (190°C/21.6 kg)     SPEC     APPLICATION

 

7000F (FILM GRADE)

 

 

     0.04                                      

ــ ــ DOWNLOAD SHEET Film

 

EX3 S (PE100)/HMCRP100

 

  0.22±0.02 6.2±1 DOWNLOAD SHEET Pipe

 

HB0035

 

0.35 ــ ــ DOWNLOAD SHEET Blow moulding

 

HIPS7240

 

4.5 ــ ــ DOWNLOAD SHEET Food containers

 

HD-52505

 

5 ــ ــ DOWNLOAD SHEET Containers

 

HD- 62107

 

7 ــ ــ DOWNLOAD SHEET Injection moulding

 

HD –EX 5

 

ــ 0.28 8 DOWNLOAD SHEET Film extrusion

 

HD6070EA

 

7 ــ ــ DOWNLOAD SHEET Injection moulding

 

HD6070UA

 

7 ــ ــ DOWNLOAD SHEET Injection moulding

 

HD-60507

 

7.5 ــ ــ DOWNLOAD SHEET Injection moulding

 

HD-52518

 

18 ــ ــ DOWNLOAD SHEET Injection moulding

 

1108J

 

8.1 ــ ــ DOWNLOAD SHEET Injection moulding

 

HCH 5110

 

10 ــ ــ DOWNLOAD SHEET Film

 

HD BL4

 

ــ ــ 9.5 DOWNLOAD SHEET Moulding

Low density Polyethylene

LDPE exhibits some of the same properties as high density polyethylene. The main difference between low density and high density polyethylene is low density’s flexibility. The main application for LDPE sheet is prosthetic devices. Most of these are either drape formed or vacuum formed.

Footer Logo

Royal Global Energy is an energy commodity trading company. We are engaged in commercial activities primarily across oil trading, shipping and soft commodities. Our success is anchored on the skill, market intelligence and worldwide resources we deploy to add value to our customers, stakeholders and to optimise the value chain.

Find us at

Address:
No,2201 FL 10th , NOOR TEHRAN Commercial Complex, Valiasr Street, Tehran- IRAN

       +98 21 8822 7734 (10 line)

      +98 21 8822 7736

 

  RGE@RoyalGlobalEnergy.com   

   Export@RoyalGlobalEnergy.com

  .

    Saturday -Thursday: 8:00 Am - 18:00 Pm
    Friday: Closed

Send us a message

Send Us

Copyright © 2016 . All rights reserved Design And Developed by Green Mind