White Spirit, Solvent 402
White Spirit Manufacturing, Specification & Warehouse
White Spirit is the most widely solvent for paint and other industry. The raw materials for white spirit production act kerosene. In general white spirit is light part of kerosene fraction cut with using fractional distillation system. At our factory for producing the high-quality white spirit, we use high-efficiency fractional distillation system and a lot of know-how. Our white spirit factory is operating in continuous mode 24/7 and produce transparent, unscented white spirit. For our buyers, we propose special payment conditions and delivery white spirit in drums and ISO containers.
For the group of substances included in the term white spirit, the constituents are a mixture of saturated aliphatic and alicyclic C7- C12 hydrocarbons with a typical maximum content of 25% of C7- C12 alkyl aromatic hydrocarbons.
The various types of white spirit are produced as distillation fractions from kerosene. The white spirit type 1 (the traditional white spirit) with a content of up to 25% of aromatics and white spirit type 2 (low aromatic white spirit) with a content of up to 17% of aromatics is produced from straight-run naphtha and/or straight-run kerosene, which are refinery process streams obtained from the distillation of kerosene fraction. These fractions are subjected to fractional distillation into the appropriate boiling ranges of white spirit. A hydrodesulfurization process (removal of sulphur) is carried out either before or after the fractional distillation.
The basic principles of our factory are:
- Constantly improving production technology and conduct research
- Consistently high quality of white spirit solvents in different specification: low aromatic white spirit and odorless white spirit. We control our production at all stage of production
- Compliance with all international requirements and regulations
- Product safety data sheet, strict adherence to technology
- Operates the line on packaging solvents in steel drums and ISO container
- Loyalty programs from Distributors and Long-Term Partnerships
- Owe storage park
Certificate of analysis LAWS type-1
| Tests | Methods | Units | Results |
| Specific gravity at 15°C | ASTM D4052/ ISO 12185 | 0.76-0,81 | |
| Saybolt Color | ASTM D156 | Saybolt Color | +30 |
| Appearance | ASTM 4176 | Clear & bright :pass | |
| IBP, 760 mmHg | ASTM 1078 | °C | 157,0 |
| FBP, 760 mmHg | °C | 193,0 | |
| Aniline point, mixed | ASTM 611 | Rating | 54,0 |
| Sulfur Content | ASTM D 4294 | %W | 0.05 max |
| Refractive Index @ 20C | ASTM D 1747 | %W | 1,435 |
| Aromatic Content by FIA | ASTM D 1319 | %W | 17,9 |
Certificate of analysis LAWS type-2
| Tests | Methods | Units | Results |
| Density at 15°C | ASTM D1298/ ISO 3675 | Kg/m3 | 770,1 |
| Specific gravity at 20°C | ASTM D4052/ ISO 12185 | 0.7799 | |
| Saybolt Color | ASTM D156 | Saybolt Color | +30 |
| Appearance | ASTM 4176 | Clear & bright :pass | |
| IBP | ASTM D 86/ ISO 3405 | °C | 178 |
| Distillation 10%, | °C | 186 | |
| Distillation 50%, °C | °C | 199 | |
| Distillation 90%, °C | °C | 223 | |
| FBP | °C | 230 | |
| Residue and Loss | % vol. | 1,1 | |
| Copper Strip Corrosion | Rating | 1A | |
| Kinematic viscosity at 40°C | ASTM D 445/ ISO 3104 | mm2/s | 1,063 |
| Flash Point | ASTM D 56 | °C | 38 |
| Water by Karl Fisher | ASTM D 6304/ ISO 12937 | ppm | 56 |
| Acid number | ASTM D 974 | %W | 0,05 |
| Aromatic Content by FIA | ASTM D 1319 | %W | 4,4 |
| Olefin | ASTM D 4294/ ISO 8754 | %W | 1,9 |
| Saturated | %W | 89,8 | |
| Total Sulfur (by RX) | ppm | 59 |
All tests are carried out according to A.S.T.M. Standards
